Paints and: Coatings
TotalEnergies’ Special Fluids division offers a wide range of high-purity hydrocarbon fluids tailored to meet the specific requirements of the Paints & Coatings industry.
Our high performance product portfolio includes both aromatic and aliphatic solvents, allowing clients to select fluids that meet increasingly demanding regulatory and environmental requirements. TotalEnergies’ Special Fluids division offers technical service and solutions to both the decorative and industrial coatings markets.
Aromatic solvents:
XYLENE, TOLUENE & Aromatic Fluids
TotalEnergies offers a range of aromatic solvents, including Xylene, Nitration Grade Toluene and aromatic naphtha’s including ATOSOL 100, ATOSOL 150 and ATOSOL 200. Aromatic fluids are sourced from our refinery in Port Arthur, TX and are available from our facilities in Bayport, TX.
Aliphatic solvents:
The SPIRDANE & Ketrul Ranges
TotalEnergies’ de-aromatized aliphatic solvents are extremely pure high performance fluids that allow formulators to meet the most stringent of HSE and environmental requirements. Key characteristics include:
- Excellent solvency power
- Colorless appearance
- Tailored evaporation rates and flash points to meet client requirements
- High purity and ultra low aromatic content
Indicative Values:
PROPERTIES |
UNITS |
METHODS |
TOLUENE |
TOLUENE TDI |
XYLENE |
ORTHO-XYLENE |
SOLVAREX 9 |
SOLVAREX 9A |
SOLVAREX 10A |
SOLVAREX 10LN |
---|---|---|---|---|---|---|---|---|---|---|
DENSITY AT 15°C (59°F) |
kg/m3 |
ISO 12185 |
872 |
872 |
870 |
884 | 876 | 877 | 894 | 890 |
SAYBOLT COLOR |
Unite color Saybolt |
ASTM D156 |
+30 |
+30 |
+30 | +30 | +30 | +30 | +30 | +30 |
BOILING RANGE: -INITIAL POIN -FINAL POINT |
- 110 (230) 111 (232) |
- 111 (232) 112 (234) |
- 138 (280) 141 (286) |
- 144 (291) 145 (293) |
- 164 (327) 170 (338) |
- 162 (324) 170 (338) |
- 182 (360) 207 (405)
|
- 185 (365) 200 (392)
|
||
FLASH POINT: -ABEL -PM |
- ISO 13736 ASTM D 93 |
- 4 (39)
|
- 4 (39)
|
- 28 (82)
|
- 32 (90)
|
- 46 (114.8)
|
- 45 (113)
|
-
65 (149) |
-
64 (147) |
|
EVAPORATION RATE |
Ether =1 nBuAc=1 |
DIN 53170 ASTM D 3539 |
5 O.6 |
5 1.4 |
10
|
15
|
26
|
27 |
130 |
150 |
AROMATIC CONTENT |
%m |
GC |
99.6 |
99.9 |
98 | 99 | 95 | 99 | 99 | 98 |
BENZENE CONTENT |
mg/Kg (ppm) |
ASTM D6229 |
< 10 |
< 10 |
< 10 |
< 10 |
< 10 |
< 10 |
< 10 |
< 10 |
NAPHTALENE CONTENT |
% m |
MS |
|
0.002 | 5 |
0.47 |
||||
ANILINE POINT (IN A MIX) |
°C (°F) |
ASTM D611 |
9.6 (49.3) |
9.4 (48.9) |
13 (55) | 8,7 (47,7) |
8.9 (48) |
9.1 (48.4) |
10.5 (50.9) |
10 (50) |
VAPEUR PRESSURE AT 20°C (68°F) |
kPa |
Calculated |
3 |
3.1 | 0.8 | 1 | 0.23 | 0.24 | 0.09 | 0.05 |
VISCOSITY AT 40°C (104°F) | mm²/s |
ASTM D 445 |
0.57 |
0.57 | 0.64 | 0.64 | 0.76 | 0.76 | 0.96 | 0.95 |
CARBON CHAIN LENGTH HSPA |
C9 | C9 |
C10 |
C10 |
||||||
C.A.S. NUMBER |
108-88-3 |
108-88-3 |
1330-20-7 |
95-47-6 |
64742-95-6 (R) |
64742-95-6 (R) |
64742-94-5 (R) |
64742-94-5 (R) |
||
EC NUMBER |
203-625-9 |
203-625-9 |
215-535-7 |
202-422-2 |
918-668-5 |
918-668-5 |
919-284-0 |
918-811-1 |